Size: 14 mm Width x 94 mm Depth x 80 mm Height
Long electrical service life thanks to 16 Amp relay
Efficient connection to system cabling using V8 adapter
Safe isolation according to DIN EN 50178 between coil and contact
Functional plug-in bridges
Protection against polarity reversal Polarity protection diode
Free-wheeling diode Damping diode
Phoenix® Relay module features M3 screw thread to hold firmly and a yellow LED for indication. Module has nominal input voltage rating of 24 VDC and current rating of 18 milli-Amps. It has typical response time of eight milli-seconds and release time of 10 milli-seconds. Module features a protective circuit that has free wheeling damping diode to offer protection against polarity reversal.
Module has SPDT contact type and contact side made of AgNi material for durability. It has maximum switching voltage of 250 VAC/VDC and minimum switching voltage of 12 VDC at 10 milli-Amps. It has maximum inrush current of 30 Amps at 300 milli-second and minimum switching current of 10 milli-Amps at 12 Volts. Module operates at a temperature of -40 to 60 deg C.
Module has maximum interrupt rating of 240 Watts at 24 VDC, 58 Watts at 48 VDC, 50 Watts at 110 VDC and 48 Watts at 60 VDC. It has 80-Watts of interrupt rating at 220 VDC and 2500 VA for 250 VAC. It features 144-Watts/1500 VA of maximum-bridged interrupt rating. Module has switching capacity of 2 Amps at 24 Volts, 0.2 Amps at 110/250 Volts and 6 Amps at 24/120/250 Volts. It requires a separate PLC-ATP plate for voltages larger than 250 Volts.
Module has rated surge voltage/insulation of 6 kilo-Volts for safe isolation at control/contact side. It allows conductor of cross section 26 - 14 AWG and solid/stranded conductors of cross section 0.14 - 2.5 sq.mm. It has 100% operating factor and 4 kVAC of test voltage for relay winding/relay contact at 50 Hz. It has 3 x 10ˆ7 cycles of mechanical service life and is stored/transported at ambient temperature -40 to 85 deg C.
Module measures 14 mm x 94 mm x 80 mm and has strip length of 8 mm. It can be mounted in any position using DIN rails and is ideal for commercial or industrial applications. It works under pollution degree 2 and surge voltage category III. It has UL 94 V0 inflammability rating to withstand harsh environmental conditions. It has RT II degree of protection for extra safety. Module conforms to IEC/EN standards.
|Ships Ground. Eligible for expedited shipping||Yes|
|Contact Rating||10 Milli-Amp at 12 Volt Minimum Switching Current, 12 Volt DC at 10 Milli-Amp Minimum Switching Voltage, 250 Volt AC/DC Maximum Switching Voltage, 10 Amp Limiting Continuous Current, 30 Amp at 300 ms Maximum Inrush Current|
|Conductor Size||26-14 AWG|
|Dimension||14 mm Width x 94 mm Depth x 80 mm Height|
|Environmental Conditions||Pollution Degree: 2|
|Item||PLC Relay Module|
|Amperage Rating||10 Amp Limiting Continuous, 10 Milli-Amp Switch|
|Coil Rating||18 Milli-Amp at 24 Volt DC|
|Power Rating||240 Watt|
|Number Of Poles||1|
|Release Time||10 ms|
|Response Time||8 ms|
|Standards||IEC 60664, EN 50178, IEC 62103|
|Temperature Rating||-40 to 60 deg C|
|Surge Voltage||6 Kilo-Volt|
|Frequency Rating||50 Hz Input|