Size: 6.2 mm Width x 94 mm Depth x 80 mm Height
Actuator connected directly to relay module
Time savings of up to 60 %
No need for additional modular terminal blocks
Efficient connection to system cabling using V8 adapter
Relay modules with safe isolation according to DIN EN 50178 between coil and contact
Space savings of up to 80 %
Functional plug-in bridges
Phoenix® PLC Actuator interface solid-state relay module features M3 screw thread and a yellow LED for indication. Relay has nominal input voltage rating of 24 VDC and current rating of 9 milli-Amps. It has voltage of less than or equal to 0.25 Volt at switching threshold "0" signal and greater than or equal to 0.8 Volt at switching threshold "1" signal. It operates at transmission frequency of 10 Hz and input voltage range of 0.8 - 1.2 Volts. It has typical response time of three milli-seconds and turn-off time of nine milli-seconds.
Relay features freewheeling damping diode circuit to offer protection against polarity reversal. It has output voltage range of 24 - 253 VAC and 0.75 Amp of limiting continuous current. It has maximum inrush current of 30 Amps at 10 milli-seconds and 10 milli-Amps of minimum load current. It has voltage drop of less than or equal to 1 Volt at limiting continuous current in off state. It operates at ambient temperature of -25 to 60 deg C.
Relay has 2-wire, floating RCI output circuit for extra safety. It has maximum load value of 4.5 Aˆ2s. It has 100% operating factor and 2.5 kilo-Volts of input/output test voltage at 50 Hz, one minute. It allows conductor of cross section 26 - 14 AWG/kcmil and solid/stranded conductors of cross section 0.14 - 2.5 sq.mm. It features reliable basic insulation for added protection.
Relay measures 6.2 mm x 94 mm x 80 mm and has strip length of 8 mm. It works under pollution degree 2 and surge voltage category III. It is stored/transported at ambient temperature of -25 to 70 deg C. It has UL 94 V0 inflammability rating to withstand harsh environmental conditions. It can be mounted in any position using DIN rails and is ideal for commercial or industrial applications. Relay conforms to IEC/EN standards.
|Ships Ground. Eligible for expedited shipping||Yes|
|Frequency Rating||50 Hz Input, 10 Hz Transmission|
|Item||PLC Interface Relay Module|
|Standards||IEC 60664, EN 50178, IEC 62103|
|Temperature Rating||-25 to 60 deg C|
|Amperage Rating||9 Milli-Amp Input, 0.75 Amp Output|
|Conductor Size||26-14 AWG|
|Dimension||6.2 mm Width x 94 mm Depth x 80 mm Height|
|Environmental Conditions||Pollution Degree: 2|
|Release Time||9 ms|
|Response Time||3 ms|
|Voltage Rating||24 Volt DC Input, 24 - 253 Volt AC Output|