Schneider Electric / Square D LP4K1201BW3 TeSys® K Non-Reversing Contactor; 3 Pole, 12 Amp, 24 Volt DC Coil

*Images are representative of products listed and may not be actual product.
  • Square D by Schneider Electric LP4K1201BW3 Schneider Electric / Square D LP4K1201BW3 TeSys® K Non-Reversing Contactor; 3 Pole, 12 Amp, 24 Volt DC Coil
Manufacturer: Square D by Schneider Electric
Catalog#: LP4K1201BW3
Crescent Part#: 202024
UPC: 785901823971
Your Price:

Product Details

Size: 1.770 Inch Width x 2.240 Inch Depth x 2.280 Inch Height

TeSys® K miniature contactors and overload relays are available in 3 contactor ratings for the USA market for inductive motor applications up to 12 full-load amps and resistive loads up to 20 amps. TeSys K contactors and overload relays are ideal for general duty applications where small size and reliability are key concerns

Devices are available with low consumption DC operating coils for direct connection to PLC circuits

Control circuit type DC low consumption

Associated fuse rating, 10 Amp gG for signalling circuit conforming to VDE 0660, 10 Amp gG for signalling circuit conforming to IEC 60947, 25 Amp aM for power circuit, 25 Amp gG at <= 440 Volt for power circuit

Average impedance 3 milli-ohm at 50 hz - Ith 20 Amp for power circuit

Tightening torque: 1.3 Nm on screw clamp terminals with screwdriver flat 6 mm dia, 1.3 Nm on screw clamp terminals with screwdriver Philips No 2

Safety reliability level: B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1, B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1

Product Details:

Schneider Electric / Square D TeSys® K 3-Pole Non-reversing contactor uses built-in bi-directional peak limiting diode suppressor coil technology with a coil voltage of 24 VDC for reliable operation. It is suitable to use with TeSys K motor management system and used for accommodating resistive loads. It has rated operational voltage rating of 690 VAC, current rating of 12 Amps and power rating of 5.5 kilo-Watt at frequency of 50/60 Hz. It is rated for withstanding impulse voltage of 8 kilo-Volts and has insulation voltage rating of 690 Volts. It has circuit making capacity of 144 Amps, breaking capacity of 110 Amps and has NO auxiliary contact configuration.

Contactor uses 20-Amps and 10-Amps current rated fuses for protecting contactor from short-circuit current and overload voltage. The special armature structure design allows all devices and all operating coils, AC/DC, to have the same physical size and panel footprint for convenience. It can be easily installed on to mounting plate or rail and has screw clamp connection. Connector has terminal torque of 1.3 Nm for accommodating 0.34 - 1.5 sq.mm, 0.75 - 4 sq.mm and 1.5 - 4 sq.mm flexible/solid cables. It measures 1.770 Inch x 2.240 Inch x 2.280 Inch.

Contactor offers electrical durability of 1.3 Mega cycles for 32 Amps AC-3 at Ue less than or equal to 440 Volts and 0.3 Mega cycles for 6 Amps AC-1 at Ue less than or equal to 440 Volts. It has mechanical durability of 30 Mega cycles and has an operating rate of 3600 cycles/hour. It has rated breaking capacity of 70 Amps at 660 - 690 Volts, 110 Amps at 380 - 400/220 - 230 Volts, 80 Amps at 500 Volts, 110 Amps at 440/415 Volts. Contactor had 1.8-Watts heat dissipation for instantaneous type of auxiliary contacts and provides 5 milli-Amps minimum switching current and 17 Volts minimum switching voltage for signaling circuit. It operates within temperature rating of -20 to 50 deg C and stored at a temperature rating of -50 to 80 deg C with IP2X-degree protection. Contactor is UL listed and CSA certified.

Product Specification

Product Details
Manufacturer Square D by Schneider Electric
Catalog# LP4K1201BW3
Shipping Information
Ships Ground. Eligible for expedited shipping Yes
Other Information
Brand Name Schneider Electric / Square D
Amperage Rating 12 Amp
Coil Voltage 24 Volt DC
Mounting Plate/Rail
Item Non-Reversing Contactor
Connection Screw Clamp
Degree Of Protection IP2x
Contact Configuration Pole: 3 NO, Auxillary: NO
Environmental Conditions Storage Temperature: -50 to 80 deg C, Flame Retardance: Requirement 2 Conforming To NF F 16-102, Requirement 2 Conforming To NF F 16-101, Flammability Rating UL94 V-1
Power Rating 5.5 kilowatt at 440 Volt AC 50/60 Hz, 5.5 kilowatt at 380 - 415 Volt AC 50/60 Hz, 3 kilowatt at 220 - 230 Volt AC 50/60 Hz, 4 kilowatt at 660 - 690 Volt AC 50/60 Hz, 4 kilowatt at 500 - 600 Volt AC 50/60 Hz, 4 kilowatt at 480 Volt AC 50/60 Hz
Number Of Poles 3
Size 1.770 Inch Width x 2.240 Inch Depth x 2.280 Inch Height
Frequency Rating 50/60 Hz
Standards BS 5424, IEC 60947, NFC 63-110, VDE 0660, CSA Certified, UL, RoHS Compliant Cmpliant
Sub Brand TeSys® K
Temperature Rating -25 to 50 deg C
Timing Range 30 - 40 ms Coil Energisation And NO Closing, 10 - 20 ms Coil De-Energisation And NO Opening
Voltage Rating <=690 Volt AC 50/60 Hz for Signalling Circuit, 690 Volt AC 50/60 Hz for Power Circuit

Customer Questions & Answers

Ask your questions, share your answers.
We respect your privacy. Specify email and we will send the answer to your address. We never reveal your information or use it to send you not related email.
Write a Review

Review /

Customer Reviews
This product is not rated. Click here to rate this product!

Login for Availabilty

Square D by Schneider Electric