Thomas & Betts HS12-6L Shrink-Kon® 3:1 Ratio Heavy Wall Heat Shrinkable Tubing; 0.510 Inch x 6 Inch, 8-6 AWG, Black

*Images are representative of products listed and may not be actual product.
  • Thomas & Betts (T&B) HS12-6L Thomas & Betts HS12-6L Shrink-Kon® 3:1 Ratio Heavy Wall Heat Shrinkable Tubing; 0.510 Inch x 6 Inch, 8-6 AWG, Black
Manufacturer: Thomas & Betts (T&B)
Catalog#: HS12-6L
Crescent Part#: 104516
UPC: 786210878560
Your Price:

Product Details

Dimension: 0.510 Inch Dia x 6 Inch Length

Withstands severe mechancial requirements of U.R.D., submersible, and direct burial installations

Tubing, featuring an internally applied sealant, offers protection against moisture, and may be used over lead, steel, aluminum, copper, standard plastic and elastomeric insulating materials

Product Details:

Thomas & Betts Shrink-Kon® HS Series Heavy wall 3:1 ratio heat shrinkable tubing in black color is made of thermally stabilized cross-linked polyolefin and comes with thermoplastic adhesive liner. It offers protection against moisture and used over lead, steel, aluminum, copper, standard plastic and elastomeric insulating materials. Tubing offers effective method for sealing 8 - 6 AWG cable ends and pipe conduit. It withstands severe mechanical requirements of U.R.D, submersible and direct burial installations. Tubing measures 0.510 Inch diameter x 6 Inch. It elongates up to 600% of the original size after heating and can recover +1%, -10% longitudinal change.

Tubing adhesive softens at 90 +/-5 deg C and shrinks at a temperature of 120 deg C. It has hardness rating of 50 D and has dielectric strength of 500 V/mil. It fits aluminum/copper splice with maximum length of 1.750-Inch. Tubing has tensile strength of 14.5 MPa and specific gravity of 1.1. It is rated for voltage of 600 Volts. It has continues operating temperature rating of -55 to 110 deg C. It comes with water absorption capacity of 0.1% and volume resistivity of 10^16 Ohm/cm. It can withstand temperature rating of 250 deg C for up to 4 hours without being cracking/flowing. It has recovered wall thickness of 0.090-Inch for excellent fluid resistance. Tubing is UL listed/CSA certified and is RoHS compliant.

Product Specification

Product Details
Manufacturer Thomas & Betts (T&B)
Catalog# HS12-6L
Shipping Information
Ships Ground. Eligible for expedited shipping Yes
Other Information
Item Heavy Wall Heat Shrink Tubing
Length 6 Inch
Material Cross-Linked Polyolefin, Thermoplastic Adhesive Lined
Low Temperature Flexibility No Cracking (4 Hour At -55 deg C)
Minimum Shrink Temperature 120 deg C
Dielectric Strength 500 Volt
Color Black
Operating Temperature -55 to 110 deg C
RoHSURL https://s3.amazonaws.com/cesco-content/unilog/Batch6/786210/43310-RoHSURL.pdf
Recovered Diameter 0.160 Inch ID
Shrink Ratio 3:1
Application Fits AL/CU Splice With Maximum Length Of 1.750 Inch
Brand Name Thomas & Betts
Heat Shock No Cracking Or Flowing (4 Hour At 250 deg C)
Expandable Diameter 0.510 Inch ID
Voltage Rating 600 Volt
Ultimate Elongation 600%
Volume Resistivity 10λ16 Ohm/cm
Wall Thickness 0.090 Inch Nominal Recovered
Wire Size 8-6 AWG
Water Absorption 0.1%
Standards RoHS Compliant, UL, CSA
Specific Gravity 1.1
Tensile Strength 14.5 MPa
Sub Brand Shrink-Kon®
Type HS Series

Customer Questions & Answers

Ask your questions, share your answers.
We respect your privacy. Specify email and we will send the answer to your address. We never reveal your information or use it to send you not related email.
Write a Review

Review /

Customer Reviews
This product is not rated. Click here to rate this product!

Login for Availability

Thomas & Betts (T&B)