Thomas & Betts HSC-750 Shrink-Kon® 3:1 Ratio Heat Shrinkable End Cap; 2.700 Inch x 4 Inch, 600-1000 MCM, Black

*Images are representative of products listed and may not be actual product.
  • Thomas & Betts (T&B) HSC-750 Thomas & Betts HSC-750 Shrink-Kon® 3:1 Ratio Heat Shrinkable End Cap; 2.700 Inch x 4 Inch, 600-1000 MCM, Black
Manufacturer: Thomas & Betts (T&B)
Catalog#: HSC-750
Crescent Part#: 10811
UPC: 786210852904
Your Price:

Product Details

Dimension: 2.700 Inch Dia x 4 Inch Length

No copper corrosion

Product Details:

Thomas & Betts Shrink-Kon® HSC Series 3:1 ratio heat shrinkable end cap in black color is made of cross-linked polyolefin and comes with thermoplastic adhesive liner. It offers effective method for sealing 600 - 1000 MCM cable ends and pipe conduit. It provides extra thickness at the tip of the end to prevent sharp ends of the cable form puncturing the seal. End cap comes with thick adhesive liner to provide complete environmental protection and insulation. It is resistant to common fluids and solvents. End cap measures 2.700 Inch diameter x 4.00 Inch. It elongates up to 550% of the original size after heating and can recover +1%, -10% longitudinal change.

End cap offers extra thickness at the tip of the end prevents sharp ends of the cable form puncturing the seal. End cap adhesive softens at 90 +/-5 deg C and shrinks at a temperature of 120 deg C. It has hardness rating of 50 D and has dielectric strength of 500 V/mil. End cap has tensile strength of 14.5 MPa and specific gravity of 14.5. It is rated for voltage of 600 Volts. It has continues operating temperature rating of -55 to 110 deg C. End cap is V-0 Per UL 94 flammability rated. It comes with water absorption capacity of 0.1% and volume resistivity of 10^16 Ohm/cm. End cap can withstand temperature rating of 250 deg C for up to 4 hours without being cracking/flowing. It has recovered wall thickness of 0.160-Inch for excellent fluid resistance.

Product Specification

Product Details
Manufacturer Thomas & Betts (T&B)
Catalog# HSC-750
Shipping Information
Ships Ground. Eligible for expedited shipping Yes
Other Information
Color Black
Item Heat Shrink End Cap
Length 4 Inch
Material Cross-Linked Polyolefin, Thermoplastic Adhesive Lined
Low Temperature Flexibility No Cracking (4 Hour At -55 deg C)
Minimum Shrink Temperature 120 deg C
Shrink Ratio 3:1
Brand Name Thomas & Betts
Type HSC Series
Water Absorption 0.1%
Wire Size 600-1000 MCM
Voltage Rating 600 Volt
Ultimate Elongation 550%
Volume Resistivity 10λ16 Ohm/cm
Wall Thickness 0.160 Inch Nominal Recovered
Dielectric Strength 500 Volt
Environmental Conditions Flammability Rated V-0 Per UL 94
Sub Brand Shrink-Kon®
Tensile Strength 14.5 MPa
Specific Gravity 1.1
Expandable Diameter 2.700 Inch ID
Heat Shock No Cracking Or Flowing (4 Hour At 250 deg C)
Operating Temperature -55 to 110 deg C
RoHSURL https://s3.amazonaws.com/cesco-content/unilog/Batch6/786210/13721-RoHSURL.pdf
Recovered Diameter 0.870 Inch ID

Customer Questions & Answers

Ask your questions, share your answers.
We respect your privacy. Specify email and we will send the answer to your address. We never reveal your information or use it to send you not related email.
Write a Review

Review /

Customer Reviews
This product is not rated. Click here to rate this product!

AVAILABILITY

In-Stock
Thomas & Betts (T&B)