Thomas & Betts HSC2-20 Shrink-Kon® 3:1 Ratio Heat Shrinkable End Cap; 0.750 Inch x 2.500 Inch, 6-2 AWG, Black

*Images are representative of products listed and may not be actual product.
  • Thomas & Betts (T&B) HSC2-20 Thomas & Betts HSC2-20 Shrink-Kon® 3:1 Ratio Heat Shrinkable End Cap; 0.750 Inch x 2.500 Inch, 6-2 AWG, Black
Manufacturer: Thomas & Betts (T&B)
Catalog#: HSC2-20
Crescent Part#: 163109
UPC: 786210872094
Your Price:

Product Details

Dimension: 0.750 Inch Dia x 2.500 Inch Length

No copper corrosion

Construction Heat Shrink

600/1000 V

6 To 2 Awg Conductor

Minimum Expanded Diameter 0.75 Inch

Maximum Recovered Diameter 0.24 Inch

Recovered Wall Thickness 0.09 Inch

Product Details:

Thomas & Betts Shrink-Kon® HSC Series 3:1 ratio heat shrinkable end cap in black color is made of cross-linked polyolefin and comes with thermoplastic adhesive liner. It offers effective method for sealing 6 - 2 AWG cable ends and pipe conduit. End cap provides extra thickness at the tip of the end to prevent sharp ends of the cable form puncturing the seal. It comes with thick adhesive liner to provide complete environmental protection and insulation. It is resistant to common fluids and solvents. End cap measures 0.750 Inch diameter x 2.500 Inch. It elongates up to 550% of the original size after heating and can recover +1%, -10% longitudinal change.

End cap offers extra thickness at the tip of the end prevents sharp ends of the cable form puncturing the seal. End cap adhesive softens at 90 +/-5 deg C and shrinks at a temperature of 120 deg C. It has hardness rating of 50 D and has dielectric strength of 500 V/mil. End cap has tensile strength of 14.5 MPa and specific gravity of 14.5. It is rated for voltage of 600 Volts. It has continues operating temperature rating of -55 to 110 deg C. End cap is V-0 Per UL 94 flammability rated. It comes with water absorption capacity of 0.1% and volume resistivity of 10^16 Ohm/cm. End cap can withstand temperature rating of 250 deg C for up to 4 hours without being cracking/flowing. It has recovered wall thickness of 0.090-Inch for excellent fluid resistance.

Product Specification

Product Details
Manufacturer Thomas & Betts (T&B)
Catalog# HSC2-20
Shipping Information
Ships Ground. Eligible for expedited shipping Yes
Other Information
Length 2-1/2 Inch
Item Heat Shrink End Cap
Low Temperature Flexibility No Cracking (4 Hour At -55 deg C)
Material Cross-Linked Polyolefin, Thermoplastic Adhesive Lined
Minimum Shrink Temperature 120 deg C
Dielectric Strength 500 Volt
Environmental Conditions Flammability Rated V-0 Per UL 94
Color Black
Operating Temperature -55 to 110 deg C
Recovered Diameter 0.240 Inch ID
Shrink Ratio 3:1
Brand Name Thomas & Betts
Expandable Diameter 0.750 Inch ID
Heat Shock No Cracking Or Flowing (4 Hour At 250 deg C)
Wire Size 6-2 AWG
Water Absorption 0.1%
Wall Thickness 0.090 Inch Nominal Recovered
Ultimate Elongation 550%
Volume Resistivity 10λ16 Ohm/cm
Voltage Rating 600 Volt
Tensile Strength 14.5 MPa
Sub Brand Shrink-Kon®
Specific Gravity 1.1
Type HSC Series

Customer Questions & Answers

Ask your questions, share your answers.
We respect your privacy. Specify email and we will send the answer to your address. We never reveal your information or use it to send you not related email.
Write a Review

Review /

Customer Reviews
This product is not rated. Click here to rate this product!

Login for Availability

Thomas & Betts (T&B)