Watt Stopper DSW-301-W Dual Technology Passive Infrared and Ultrasonic Occupancy Sensor; 120/277 Volt AC, Automatic On/Off, Manual On/Off, Wall Switch Mount, White

*Images are representative of products listed and may not be actual product.
  • Watt Stopper DSW-301-W Watt Stopper DSW-301-W Dual Technology Passive Infrared and Ultrasonic Occupancy Sensor; 120/277 Volt AC, Automatic On/Off, Manual On/Off, Wall Switch Mount, White
Manufacturer: Watt Stopper
Catalog#: DSW-301-W
Crescent Part#: 226171
UPC: 754182935444
Free Shipping!
Your Price:

Product Details

Size: 2.730 Inch Length x 1.750 Inch Width x 1.810 Inch Depth

Four occupancy logic options to customize control to meet application needs

Product Details:

Watt Stopper DSW-301 Dual technology passive infrared and ultrasonic occupancy sensor in white color is rated at 120/277 VAC, 50/60 Hz and is designed for loads like 1/6 hp, 0 - 1000 Watts ballast/LED/tungsten, 0 - 1200 Watts ballast/LED. It measures 2.730 Inch x 1.750 Inch x 1.810 Inch. Sensor combines the benefits of passive infrared and ultrasonic detection technologies. It provides high sensitivity/dense coverage for extraordinary performance and saves maximum energy by defaulting to manual-ON to 50% operation. Sensor has an appealing design with a color-matched vandal resistant lens for precise coverage/durability and a low profile. It has a zero-crossing circuitry for long relay life and neutral terminals are exposed with the help of optional neutral connection with break off tab. It allows multi-way control from one of up to four control locations and has a time delay of 5/10/30 minutes. It covers major motion up to 35 ft x 30 ft, minor motion up to 20 ft x 15 ftfor PIR and major motion of 20 ft x 20 ft, minor motion of 15 ft x 15 ftfor ultrasonic. Dual technology wall switch sensor is designated by high sensitivity to small/large movements, appealing aesthetics and various other features.

Sensor turns lights OFF/ON based on occupancy and replaces existing wall switches installing in a 1-Gang junction box with or without neutral wiring. It is factory set for Manual-ON making it energy saving to switch ON only when needed using advanced PIR technology to detect occupancy. Time delay elapses and lights automatically turn OFF when a place is evacuated. Various control options such as auto ON operation, walk through and test modes can be obtained with the help of DIP switch settings. Walk-through mode turns lights OFF, three minutes after the room is initially occupied if no motion is detected after the first 30 seconds. Sensor is suitable for retrofit projects and suits small/enclosed spaces and finds application in small offices/conference rooms and lunch/break rooms.

Quick/easy adjustments are possible with the test mode and the sensor is enclosed in a durable plastic housing. Using multiple sensors, controlling one or more loads from up to four locations is possible. Shut-OFF can be impended with selectable audible/visual alerts and has an LED for indicating detection of occupancy. This is ideal for presentations due to sensor returning automatically to auto-ON after lights are turned OFF manually in automatic mode. Sensor operates as a service switch in the unlikely event of a failure with the help of its service mode and is compatible with decorator wall plates. Sensor is UL/cUL listed.

Product Specification

Product Details
Manufacturer Watt Stopper
Catalog# DSW-301-W
Shipping Information
Ships Ground. Eligible for expedited shipping Yes
Other Information
Mounting Wall Switch
Model DSW-301
Material Plastic
Load Rating 0 - 1000 Watt Ballast/LED/Tungsten, 1/6 hp At 120 Volt AC, 0 - 1200 Watt Ballast/LED, 1/6 hp At 277 Volt AC
Item Passive and Ultrasonic Infrared Occupancy Sensor
Connection Flying Lead
Environmental Conditions 95% Non-Condensing Relative Humidity, For Indoor Use Only
Color White
Operating Cycles 1000000
Operating Mode Automatic ON/OFF, Manual ON/OFF
Response Time 5 - 30 min
Sensing Distance Major Motion: 35 ft x 30 ft PIR, 20 ft x 20 ft Ultrasonic, Minor Motion: 20 ft x 15 ft PIR, 15 ft x 15 ft Ultrasonic, IR Range On Axis: 525 Sq ft PIR, 200 Sq ft Ultrasonic
Size 2.730 Inch Length x 1.750 Inch Width x 1.810 Inch Depth
Actuator Button
Application For Small And Executive Offices, Small And Medium Conference Rooms And Lunch/Break Rooms
Brand Name Watt Stopper
Frequency Rating 50/60 Hz
Voltage Rating 120/277 Volt AC
Temperature Rating 35 deg C
Standards UL 244A and 508, cUL Listed, Complies With 2011 NEC Requirements
Type Dual Technology

Customer Questions & Answers

Ask your questions, share your answers.
We respect your privacy. Specify email and we will send the answer to your address. We never reveal your information or use it to send you not related email.
Write a Review

Review /

Customer Reviews
This product is not rated. Click here to rate this product!

Login for Availability

Watt Stopper