HolsterTop with lock-in System secures tools to increase productivity
Shoulder bolt and nut on top hinge
4 rivets attach top to each front rail
Back-up plates reinforce all top connectors
Slip-resistant foot pads attached to the EDGE® structure
Werner 6200 Series Type IA step ladder with working height of 10 ft has approximate width/spread of size 23-3/8 Inch, 41-1/4 Inch along with duty rated at 300 lb. It is designed with 5.750 Inch x 13 Inch sized top, front rails/flange of size 3-1/8 Inch/1-7/8 Inch, rear rails/flange of size 1-7/8 Inch/1-3/16 Inch and each step of size 3-Inch.
Step ladder features holster top with the lock-in system to secure tools and increases productivity. Ladder offers full set of rear horizontals spaced one per foot and heavy-duty internal steel spreaders. It has double riveted slip-resistant TRACTION-TRED® steps and the footpads are riveted to the EDGE® structure.
Ladder consists of shoulder bolt/nut on top hinge, knee-braced steps and each rivet backed up by metal, metal plates or washers to protect rails. It provided with optional manual pail shelf kit and automatic closing pail shelf-kit. The holster top consists of paint tray slot; lock in accessory sockets, two tool holes, two parts trays and tape measure slot. It is an ANSI A14.5 (2007), OSHA certified.
|Ships Ground. Eligible for expedited shipping||Yes|
|Load Capacity||300 lb|
|Ladder Height||6 ft|
|Number Of Steps||5|
|Rails Dimension||3-1/8 Inch Front Wide x 1-7/8 Inch Rear Wide|
|Base Spread||41-1/4 Inch|
|Bottom Width||23-3/8 Inch|
|Flange Dimension||1-3/16 Inch Front Wide x 1-3/16 Inch Rear Back Wide|
|Type||6200 Series, Type IA|
|Standards||ANSI A14.5, OSHA|
|Step Size||3 Inch|
|Top Dimension||5.750 Inch X 13 Inch|